GM5-9
Submersible drainage pump
- Submersible drainage pump constructed with composite polymers developed especially for this product.
- Double shaft seal with oil chamber.
- Small dimensions and great performance, for use in a wide variety of applications, for flow rates up to 217 litres per minute.
- With float switch for automatic start and stop.
GM 10-8
Submersible drainage pump
- Submersible drainage pump constructed with composite polymers developed especially for this product.
- Double shaft seal with oil chamber.
- Small dimensions and great performance, for use in a wide variety of applications, for flow rates up to 233 litres per minute.
- With float switch for automatic start and stop.
GX ZERO
Submersible clean water pumps
- Single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port and suction non-return valve.
- Suction capability up to 1 mm from the bottom. Motor cooled by the pumped water passing between the motor jacket and the external jacket.
- Double shaft seal with oil chamber.
- The pump is fitted with a suction non-return valve which, during operation, allows to manually move the pump to several points in the room and draw water up to 1 mm avoiding that the pump loses its priming.
GXR, GXV
Stainless steel submersible pumps
- Single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port.
- GXR: with open impeller.
- GXV: with free-flow (vortex) impeller.
- Motor cooled by the pumped water passing between the motor jacket and the external jacket.
- Double shaft seal with oil chamber.
GQR
Submersible drainage pumps.
- Single-impeller submersible drainage pump, with open impeller.
- GQR: with vertical threaded delivery port (G 1 1/2).
- GQR 10 32: with horizontal flanged and threaded delivery port (DN 32, PN 6 – G 1 1/2).
- Double mechanical shaft seal with interposed oil chamber, to protect against dry-running.
GQV, GQS
Submersible sewage and drainage pumps.
- Single-impeller submersible pumps, with free-flow (vortex) impeller.
- GQS: with vertical threaded delivery port G 1 1/2″ or G 2″.
- GQV: with horizontal G 2” or G 2”1/2 threaded delivery port and with DN 50 or DN 65 flanged delivery port.
- Double mechanical shaft seal with interposed oil chamber, to protect against dry-running.
GEO
Automatic waste water collecting and lifting station.
- High-density polyethylene tank, resistant to corrosion, with minimum overall dimensions.
- – GEO 40 single tank with 40 liter nominal capacity for the installation of a GXRM type.
- – GEO 230 single tank with 230 liter nominal capacity for the installation of an electropump type GM 10, GQ, GX or GM series.
- – GEO 500 double tank with 500 liter nominal capacity for the installation of two electropumps type GM 10, GQ, GX or GM series.
- Pipe kit for electropump connection.
- Two possible installation, at ground level or underground.
- For underground installation, extentions can be used.
- Easy pump access through a cover fixed with screws.
GEOTRIT-GEOCLEAN-GEOCOMP
Macerating pumping system.
GEOCLEAN
- GEOCLEAN makes the addition of a domestic kitchen or utility room easy even when below or distant from a drain.
- The system has a clapet valve and it cannot be used with waste waters.
- GEOCLEAN is provided with flexible sleeves, elbow, metal hose clips, plugs.
- Macerating pumping system. It is possible to install a complete bathroom in a basement conversion or loft extension.
- The GEOCOMP macerating system is installed in a case specifically designed for horizontal outlet spigots.
- Installed and used correctly, this unit will give consistent and reliable service. The system has a grinder pump, clapet valve and carbon filter.
- GEOCOMP is provided with flexible sleeves, elbow, metal hose clips.
-
- Lifting station for clean water.
- GEOCLEAN makes the addition of a domestic kitchen or utility room easy even when below or distant from a drain.
- The system has a clapet valve and it cannot be used with waste waters.
- GEOCLEAN is provided with flexible sleeves, elbow, metal hose clips, plugs.
