GX 40
Stainless steel submersible pumps sewage and drainage
- Single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port.
- GXC: with two-passage impeller.
- GXV: with free-flow (vortex) impeller
- Double shaft seal with interposed oil chamber.
Technical Specifications
Flow
3 / 36
mc / h
Head
3 / 12.9
m
Power
0.55 / 1.2
kW
Applications
- For clean and dirty water, also containing solids up to 35 mm grain size.
- The GXV free-flow impeller construction is particularly suitable for liquids with a high solid content or with filamentous particles.
- This construction (with smooth surfaces in rolled-stainless steel and easy access for cleaning) is also suitable for certain uses in the food industry.
Operating conditions
- Liquid temperature up to 35° C.
- Maximum immersion depth: 5 m
- Continuous duty (with submerged motor).
Features
- Cable length 10 m, pump single-phase with plug
- Handle in polypropylene, with frame in stainless steel.
- Easy inspection of the capacitor area.
- Easy adjustment of the float switch: to allow the adjustments of start/stop pump levels.
- Ring against accidental extraction of the cable.
- The double shaft seal with oil chamber separates the motor from the water and provides further protection against accidental operation when dry.
- G 1 1/2 vertical, upward delivery port for installation in small pits, without the need for an elbow on the pump.
- Chamber with food/pharmaceutical machinery oil
- Totally in stainless steel. All parts in contact with the pumped liquid both internal and external are in stainless steel AISI 304
- GXV The free-flow impeller (vortex) construction is particularly suitable for liquids with a high solid content up to 35 mm grain size or with filamentous particles.
- GXC The two-passage impeller construction is particularly suitable for liquids containing solids up to 35 mm grain size.
- Shaft in chrome-nickel stainless steel.
| Brands | Calpeda |
|---|---|
| Category Top Level | Building Services |
Related products
GM5-9
Submersible drainage pump
- Submersible drainage pump constructed with composite polymers developed especially for this product.
- Double shaft seal with oil chamber.
- Small dimensions and great performance, for use in a wide variety of applications, for flow rates up to 217 litres per minute.
- With float switch for automatic start and stop.
GM 10-8
Submersible drainage pump
- Submersible drainage pump constructed with composite polymers developed especially for this product.
- Double shaft seal with oil chamber.
- Small dimensions and great performance, for use in a wide variety of applications, for flow rates up to 233 litres per minute.
- With float switch for automatic start and stop.
GX ZERO
Submersible clean water pumps
- Single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port and suction non-return valve.
- Suction capability up to 1 mm from the bottom.
Motor cooled by the pumped water passing between the motor jacket and the external jacket. - Double shaft seal with oil chamber.
- The pump is fitted with a suction non-return valve which, during operation, allows to manually move the pump to several points in the room and draw water up to 1 mm avoiding that the pump loses its priming.
GXR, GXV
Stainless steel submersible pumps
- Single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port.
- GXR: with open impeller.
- GXV: with free-flow (vortex) impeller.
- Motor cooled by the pumped water passing between the motor jacket and the external jacket.
- Double shaft seal with oil chamber.
GEOTRIT-GEOCLEAN-GEOCOMP
Macerating pumping system.
GEOCLEAN
- GEOCLEAN makes the addition of a domestic kitchen or utility room easy even when below or distant from a drain.
- The system has a clapet valve and it cannot be used with waste waters.
- GEOCLEAN is provided with flexible sleeves, elbow, metal hose clips, plugs.
GEOCOMP
- Macerating pumping system. It is possible to install a complete bathroom in a basement conversion or loft extension.
- The GEOCOMP macerating system is installed in a case specifically designed for horizontal outlet spigots.
- Installed and used correctly, this unit will give consistent and reliable service.
The system has a grinder pump, clapet valve and carbon filter. - GEOCOMP is provided with flexible sleeves, elbow, metal hose clips.
GEOCLEAN
-
- Lifting station for clean water.
- GEOCLEAN makes the addition of a domestic kitchen or utility room easy even when below or distant from a drain.
- The system has a clapet valve and it cannot be used with waste waters.
- GEOCLEAN is provided with flexible sleeves, elbow, metal hose clips, plugs.
NM, NMS
NM, NM4 Close-coupled centrifugal pumps; electric motor with extended shaft directly connected to the pump up to 22 kW (15 kW for NM4).
NMS, NMS4 Close-coupled centrifugal pumps, new bracket construction for standard motors (stub-shaft construction) with integrated thrust bearing.
Rated speed of rotation (50 Hz):
NM, NMS ≈ 2900 rpm.
NM4, NMS4 ≈ 1450 rpm.
Pump casing with axial suction and radial delivery on top, main dimensions and performance according to EN 733 with additional sizes for completion. (NMS4 80/400).
N 40-250C version with pump casing and lantern bracket in cast iron.
BNM(S), BNM(S)4: version with pump casing and lantern bracket/casing cover in bronze.
The pumps are supplied fully painted.
Version with frequency converter (on request)
Centrifugal pumpsn≈1450 1/min
Close-coupled centrifugal pumps; electric motor with extended shaft directly connected to the pump up to 15 kW, new bracket construction for standard motors (Stub-shaft construction) from 18,5 to 75 kW with integrated thrust bearing.
Pump casing with axial suction and radial delivery on top, main dimensions and performance according to EN 733 with additional sizes for completion.
NM(S)4: version with pump casing and lantern bracket in cast iron.
BNM(S)4: version with pump casing and lantern bracket/casing cover in bronze.
The pumps are supplied fully painted.
Version with frequency converter (on request)
End-suction centrifugal pumps EN 733 2- and 4- pole Product Description
Single-stage end-suction centrifugal pumps, with bearing bracket.
- The electropumps N, B-N, N4, B-N4 series comply with the European Regulation no. 547/2012 in force starting from 01.01.2013.
- Nominal duty points and main dimensions in accordance with EN 733.
- Back Pull-Out construction, for simple and quick dismantling and reassembly.
- N, N4: version with pump casing and lanter bracket in cast iron.
- B-N, B-N4: version with pump casing and lanter bracket in bronze (the pumps are supplied fully painted).
- Rated speed of rotation (50 Hz): N = 2900 rpm.; N4 = 1450 rpm.
Shaft sealing
- Standardized mechanical seal in accordance with ISO 3069.
- Stuffing box seal (on request).
Reviews
There are no reviews yet.