GEOTRIT-GEOCLEAN-GEOCOMP
Macerating pumping system.
GEOCLEAN
- GEOCLEAN makes the addition of a domestic kitchen or utility room easy even when below or distant from a drain.
- The system has a clapet valve and it cannot be used with waste waters.
- GEOCLEAN is provided with flexible sleeves, elbow, metal hose clips, plugs.
GEOCOMP
- Macerating pumping system. It is possible to install a complete bathroom in a basement conversion or loft extension.
- The GEOCOMP macerating system is installed in a case specifically designed for horizontal outlet spigots.
- Installed and used correctly, this unit will give consistent and reliable service.
The system has a grinder pump, clapet valve and carbon filter. - GEOCOMP is provided with flexible sleeves, elbow, metal hose clips.
GEOCLEAN
-
- Lifting station for clean water.
- GEOCLEAN makes the addition of a domestic kitchen or utility room easy even when below or distant from a drain.
- The system has a clapet valve and it cannot be used with waste waters.
- GEOCLEAN is provided with flexible sleeves, elbow, metal hose clips, plugs.
Description
Applications
- GEOTRIT takes waste from a WC and a washbasin.
- GEOCOMP has been designed to pump away the waste water from WC, washbasin, bidet, tube and shower.
- GEOCLEAN is design to handle the evacuation water from a domestic kitchen sink, dishwasher and washing machine – all working at the same time if required. GEOCLEAN also takes waste from a washbasin, a bidet, a tube and a shower.
Operating conditions
- Voltage: 220-240 V
- Frequency: 50 Hz
- Degree of protection: IP44
- Maximum power rating: 400 W
- Maximum current consumption: 1,9 A
- Vertical pumping: max. 4 m
- Liquid temperature up to 35 °C
Additional information
| Brands | Calpeda |
|---|---|
| Category Top Level | Building Services |
Related products
GM 10-8
Submersible drainage pump
- Submersible drainage pump constructed with composite polymers developed especially for this product.
- Double shaft seal with oil chamber.
- Small dimensions and great performance, for use in a wide variety of applications, for flow rates up to 233 litres per minute.
- With float switch for automatic start and stop.
GXR, GXV
Stainless steel submersible pumps
- Single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port.
- GXR: with open impeller.
- GXV: with free-flow (vortex) impeller.
- Motor cooled by the pumped water passing between the motor jacket and the external jacket.
- Double shaft seal with oil chamber.
GQR
Submersible drainage pumps.
- Single-impeller submersible drainage pump, with open impeller.
- GQR: with vertical threaded delivery port (G 1 1/2).
- GQR 10 32: with horizontal flanged and threaded delivery port (DN 32, PN 6 – G 1 1/2).
- Double mechanical shaft seal with interposed oil chamber, to protect against dry-running.
NM, NMD
Close-coupled, centrifugal pumps with screwed connections; electric motor with extended shaft directly connected to the pump.
NM: single-impeller
NMD: with two back-to-back impellers (with axial thrust balancing).
Connections: threaded ports ISO 228/1 (BS 2779).
NM, NMD: version with pump casing and lantern bracket in cast iron.
BNM, BNMD: version with pump casing and lantern bracket in bronze.
The pumps are supplied fully painted.
End-suction centrifugal pumps EN 733 2- and 4- pole Product Description
Single-stage end-suction centrifugal pumps, with bearing bracket.
- The electropumps N, B-N, N4, B-N4 series comply with the European Regulation no. 547/2012 in force starting from 01.01.2013.
- Nominal duty points and main dimensions in accordance with EN 733.
- Back Pull-Out construction, for simple and quick dismantling and reassembly.
- N, N4: version with pump casing and lanter bracket in cast iron.
- B-N, B-N4: version with pump casing and lanter bracket in bronze (the pumps are supplied fully painted).
- Rated speed of rotation (50 Hz): N = 2900 rpm.; N4 = 1450 rpm.
Shaft sealing
- Standardized mechanical seal in accordance with ISO 3069.
- Stuffing box seal (on request).
Reviews
There are no reviews yet.