Showing 1–20 of 47 results

STARBLAZE 34L02 FIRE BARRIER COATING (Mortar)

StarBlaze 34L02 fire stop mortar helps prevent fire and smoke from spreading through large openings with cable, pipe and mixed penetrations. It is an inorganic heat absorbing Fires Barrier designed to seal penetrations through walls, floors & ceilings to prevent fire spread & provide protection

STARBLAZE 34L01 FIRE BARRIER COATING SYSTEM

StarBlaze 34L01 is a four component Fire Barrier System consists of very high -density fire & heat resistant mineral wool boards StarBlaze 34L04, coated with water-resistant StarBlaze 34K01intumescent coating, affixed with 34L03 Self expanding fire resistant sealant, which transforms into a hard ceramic during a fire to prevent the passage of fire and smoke and the transfer of heat. Specifically designed for sealing around cable & service penetrations in walls and below panels. Specifically designed for sealing around cable & service penetrations in walls and below panels.

STARBLAZE 32I02 DI-ELECTRIC FLOOR COATING-B

  • High dielectric strength & insulation resistance.
  • Meets requirements of Class B, IS 15652: 2006 (>45KV BDV)
  • High Build-up possibility.
  • Self Levelling.
  • Excellent chemical resistance.

STARBLAZE 32I01 DI-ELECTRIC FLOOR COATING-A

A self–leveling solvent free, high breakdown voltage, protection & insulation coating, developed from a unique cycloaliphatic amine curative, designed to provide insulation safety flooring.
  • High dielectric strength & insulation resistance.
  • High build –up possibility.
  • High Adhesion properly.
  • Very good Chemical resistance.
  • Self-Leveling.

Large End Suction Pumps ( ESL)

Single Stage End Suction Back Pull-out Pumps

Mixed Flow Pump (EMF)

Non Clog Sewage pumps 2 /3 vane design

ISO 2858 End Suction Pumps (ES)

Single Stage End Suction Back Pull-out Pumps. Dimensional conformance - ISO2858. Performance conformances - ISO5199

Sewage Pumps (SW)

Non Clog Sewage pumps 2 /3 vane design

NFPA Fire Pumps (HF & EF)

Split case Single / Two Stage & End Suction

Compact Split Case Pumps (CSC)

Single Stage Compact Mechanical Seal fitted pumps for air conditioning, water supply and industrial cooling water services

Split Case Pumps ( HST ) – Two Stage

Two Stage Axially Split Case Pumps with two single or two double entry impellers

Split Case Pumps ( HS ) – Single Stage

Single Stage Axially Split Case Pumps with double entry impeller

GM5-9

Submersible drainage pump
  • Submersible drainage pump constructed with composite polymers developed especially for this product.
  • Double shaft seal with oil chamber.
  • Small dimensions and great performance, for use in a wide variety of applications, for flow rates up to 217 litres per minute.
  • With float switch for automatic start and stop.

GM 10-8

Submersible drainage pump
  • Submersible drainage pump constructed with composite polymers developed especially for this product.
  • Double shaft seal with oil chamber.
  • Small dimensions and great performance, for use in a wide variety of applications, for flow rates up to 233 litres per minute.
  • With float switch for automatic start and stop.

GX ZERO

Submersible clean water pumps
  • Single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port and suction non-return valve.
  • Suction capability up to 1 mm from the bottom. Motor cooled by the pumped water passing between the motor jacket and the external jacket.
  • Double shaft seal with oil chamber.
  • The pump is fitted with a suction non-return valve which, during operation, allows to manually move the pump to several points in the room and draw water up to 1 mm avoiding that the pump loses its priming.

GXR, GXV

Stainless steel submersible pumps
  • Single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port.
  • GXR: with open impeller.
  • GXV: with free-flow (vortex) impeller.
  • Motor cooled by the pumped water passing between the motor jacket and the external jacket.
  • Double shaft seal with oil chamber.

GX 40

Stainless steel submersible pumps sewage and drainage
  • Single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port.
  • GXC: with two-passage impeller.
  • GXV: with free-flow (vortex) impeller
  • Double shaft seal with interposed oil chamber.

GQR

Submersible drainage pumps.
  • Single-impeller submersible drainage pump, with open impeller.
  • GQR: with vertical threaded delivery port (G 1 1/2).
  • GQR 10 32: with horizontal flanged and threaded delivery port (DN 32, PN 6 – G 1 1/2).
  • Double mechanical shaft seal with interposed oil chamber, to protect against dry-running.

GQV, GQS

Submersible sewage and drainage pumps.
  • Single-impeller submersible pumps, with free-flow (vortex) impeller.
  • GQS: with vertical threaded delivery port G 1 1/2″ or G 2″.
  • GQV: with horizontal G 2” or G 2”1/2 threaded delivery port and with DN 50 or DN 65 flanged delivery port.
  • Double mechanical shaft seal with interposed oil chamber, to protect against dry-running.