Centrifugal pumpsn≈1450 1/min
Close-coupled centrifugal pumps; electric motor with extended shaft directly connected to the pump up to 15 kW, new bracket construction for standard motors (Stub-shaft construction) from 18,5 to 75 kW with integrated thrust bearing.
Pump casing with axial suction and radial delivery on top, main dimensions and performance according to EN 733 with additional sizes for completion.
NM(S)4: version with pump casing and lantern bracket in cast iron.
BNM(S)4: version with pump casing and lantern bracket/casing cover in bronze.
The pumps are supplied fully painted.
Version with frequency converter (on request)
Technical Specifications
Flow
1 / 480
mc / h
Head
3 / 95
m
Power
0.25 / 75
kW
Applications
- For clean liquids without abrasives, which are non-aggressive for the pump materials (solids content up to 0.2%).
- For water supply.
- For irrigation.
- For heating, air-conditioning, cooling and circulation plants.
- For civil and industrial applications.
- When low noise operating is required.
Operating conditions
- Liquid temperature from -10 °C to +90 °C.
- Ambient temperature up to 40° C.
- Total suction lift up to 7 m.
- Maximum permissible working pressure up to 16 bar (10 bar per NM4 25/12,160,200, NM4 32/16,20; NM4 40/25; NM4 50/20,25, NM4 65/31, NM(S)4 100/250,315,400, NM(S)4 125/250,400, NMS4 150/400 and bronze version).
- Continuous duty.
| Brands | Calpeda |
|---|---|
| Category Top Level | Building Services |
Related products
GM5-9
Submersible drainage pump
- Submersible drainage pump constructed with composite polymers developed especially for this product.
- Double shaft seal with oil chamber.
- Small dimensions and great performance, for use in a wide variety of applications, for flow rates up to 217 litres per minute.
- With float switch for automatic start and stop.
GM 10-8
Submersible drainage pump
- Submersible drainage pump constructed with composite polymers developed especially for this product.
- Double shaft seal with oil chamber.
- Small dimensions and great performance, for use in a wide variety of applications, for flow rates up to 233 litres per minute.
- With float switch for automatic start and stop.
GQV, GQS
Submersible sewage and drainage pumps.
- Single-impeller submersible pumps, with free-flow (vortex) impeller.
- GQS: with vertical threaded delivery port G 1 1/2″ or G 2″.
- GQV: with horizontal G 2” or G 2”1/2 threaded delivery port and with DN 50 or DN 65 flanged delivery port.
- Double mechanical shaft seal with interposed oil chamber, to protect against dry-running.
GEO
Automatic waste water collecting and lifting station.
- High-density polyethylene tank, resistant to corrosion, with minimum overall dimensions.
- – GEO 40 single tank with 40 liter nominal capacity for the installation of a GXRM type.
- – GEO 230 single tank with 230 liter nominal capacity for the installation of an electropump type GM 10, GQ, GX or GM series.
- – GEO 500 double tank with 500 liter nominal capacity for the installation of two electropumps type GM 10, GQ, GX or GM series.
- Pipe kit for electropump connection.
- Two possible installation, at ground level or underground.
- For underground installation, extentions can be used.
- Easy pump access through a cover fixed with screws.
NM, NMS
NM, NM4 Close-coupled centrifugal pumps; electric motor with extended shaft directly connected to the pump up to 22 kW (15 kW for NM4).
NMS, NMS4 Close-coupled centrifugal pumps, new bracket construction for standard motors (stub-shaft construction) with integrated thrust bearing.
Rated speed of rotation (50 Hz):
NM, NMS ≈ 2900 rpm.
NM4, NMS4 ≈ 1450 rpm.
Pump casing with axial suction and radial delivery on top, main dimensions and performance according to EN 733 with additional sizes for completion. (NMS4 80/400).
N 40-250C version with pump casing and lantern bracket in cast iron.
BNM(S), BNM(S)4: version with pump casing and lantern bracket/casing cover in bronze.
The pumps are supplied fully painted.
Version with frequency converter (on request)
End-suction centrifugal pumps EN 733 2- and 4- pole Product Description
Single-stage end-suction centrifugal pumps, with bearing bracket.
- The electropumps N, B-N, N4, B-N4 series comply with the European Regulation no. 547/2012 in force starting from 01.01.2013.
- Nominal duty points and main dimensions in accordance with EN 733.
- Back Pull-Out construction, for simple and quick dismantling and reassembly.
- N, N4: version with pump casing and lanter bracket in cast iron.
- B-N, B-N4: version with pump casing and lanter bracket in bronze (the pumps are supplied fully painted).
- Rated speed of rotation (50 Hz): N = 2900 rpm.; N4 = 1450 rpm.
Shaft sealing
- Standardized mechanical seal in accordance with ISO 3069.
- Stuffing box seal (on request).
Reviews
There are no reviews yet.