MPC
Self-priming swimming pool pumps with built-in strainer and motor insulated from pumped water.
The pump is made with high quality plastic materials, corrosion and sand erosion resistant.
With stainless steel diffuser.
Base-plate kit.
Description
Technical Specifications
Flow
3 / 40
mc / h
Head
4.2 / 18
m
Power
0.37 / 2.2
kW
Applications
- For water circulation in swimming pool filtration systems.
- For clean or slightly dirty water with solids in suspension.
Operating conditions
- Water temperature up to 60 °C.
- Ambient temperature up to 40° C.
- Maximum permissible pressure in the pump casing 2,5 bar.
- Continuous duty.
Features
- Diffuser with peripheral-longitudinal flow, for a quicker self-priming
- Strong transparent Lexan strainer cover
- Strong Noryl pump casing
- Large 2-litre capacity strainer basket
- Stainless steel AISI 316 wear-ring diffuser-funnel, for extra reliability
- Mechanical seal without contact with the shaft, for extra safety
Additional information
| Brands | Calpeda |
|---|---|
| Category Top Level | Building Services |
Related products
GM 10-8
Submersible drainage pump
- Submersible drainage pump constructed with composite polymers developed especially for this product.
- Double shaft seal with oil chamber.
- Small dimensions and great performance, for use in a wide variety of applications, for flow rates up to 233 litres per minute.
- With float switch for automatic start and stop.
GXR, GXV
Stainless steel submersible pumps
- Single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port.
- GXR: with open impeller.
- GXV: with free-flow (vortex) impeller.
- Motor cooled by the pumped water passing between the motor jacket and the external jacket.
- Double shaft seal with oil chamber.
GQV, GQS
Submersible sewage and drainage pumps.
- Single-impeller submersible pumps, with free-flow (vortex) impeller.
- GQS: with vertical threaded delivery port G 1 1/2″ or G 2″.
- GQV: with horizontal G 2” or G 2”1/2 threaded delivery port and with DN 50 or DN 65 flanged delivery port.
- Double mechanical shaft seal with interposed oil chamber, to protect against dry-running.
GEO
Automatic waste water collecting and lifting station.
- High-density polyethylene tank, resistant to corrosion, with minimum overall dimensions.
- – GEO 40 single tank with 40 liter nominal capacity for the installation of a GXRM type.
- – GEO 230 single tank with 230 liter nominal capacity for the installation of an electropump type GM 10, GQ, GX or GM series.
- – GEO 500 double tank with 500 liter nominal capacity for the installation of two electropumps type GM 10, GQ, GX or GM series.
- Pipe kit for electropump connection.
- Two possible installation, at ground level or underground.
- For underground installation, extentions can be used.
- Easy pump access through a cover fixed with screws.
GEOTRIT-GEOCLEAN-GEOCOMP
Macerating pumping system.
GEOCLEAN
- GEOCLEAN makes the addition of a domestic kitchen or utility room easy even when below or distant from a drain.
- The system has a clapet valve and it cannot be used with waste waters.
- GEOCLEAN is provided with flexible sleeves, elbow, metal hose clips, plugs.
GEOCOMP
- Macerating pumping system. It is possible to install a complete bathroom in a basement conversion or loft extension.
- The GEOCOMP macerating system is installed in a case specifically designed for horizontal outlet spigots.
- Installed and used correctly, this unit will give consistent and reliable service.
The system has a grinder pump, clapet valve and carbon filter. - GEOCOMP is provided with flexible sleeves, elbow, metal hose clips.
GEOCLEAN
-
- Lifting station for clean water.
- GEOCLEAN makes the addition of a domestic kitchen or utility room easy even when below or distant from a drain.
- The system has a clapet valve and it cannot be used with waste waters.
- GEOCLEAN is provided with flexible sleeves, elbow, metal hose clips, plugs.
Reviews
There are no reviews yet.