Click to enlarge
NM, NMD
Back to products
I-MPC

MPC

Self-priming swimming pool pumps with built-in strainer and motor insulated from pumped water.
The pump is made with high quality plastic materials, corrosion and sand erosion resistant.
With stainless steel diffuser.
Base-plate kit.

Enquire Now
Description

Technical Specifications

Flow

3 / 40

mc / h

Head

4.2 / 18

m

Power

0.37 / 2.2

kW

Applications

  • For water circulation in swimming pool filtration systems.
  • For clean or slightly dirty water with solids in suspension.

Operating conditions

  • Water temperature up to 60 °C.
  • Ambient temperature up to 40° C.
  • Maximum permissible pressure in the pump casing 2,5 bar.
  • Continuous duty.

Features

  • Diffuser with peripheral-longitudinal flow, for a quicker self-priming
  • Strong transparent Lexan strainer cover
  • Strong Noryl pump casing
  • Large 2-litre capacity strainer basket
  • Stainless steel AISI 316 wear-ring diffuser-funnel, for extra reliability
  • Mechanical seal without contact with the shaft, for extra safety
Additional information
Brands

Category Top Level

Reviews

There are no reviews yet.

Be the first to review “MPC”

Your email address will not be published. Required fields are marked *

Related products

GM5-9

Submersible drainage pump
  • Submersible drainage pump constructed with composite polymers developed especially for this product.
  • Double shaft seal with oil chamber.
  • Small dimensions and great performance, for use in a wide variety of applications, for flow rates up to 217 litres per minute.
  • With float switch for automatic start and stop.
Quick view

GX ZERO

Submersible clean water pumps
  • Single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port and suction non-return valve.
  • Suction capability up to 1 mm from the bottom. Motor cooled by the pumped water passing between the motor jacket and the external jacket.
  • Double shaft seal with oil chamber.
  • The pump is fitted with a suction non-return valve which, during operation, allows to manually move the pump to several points in the room and draw water up to 1 mm avoiding that the pump loses its priming.
Quick view

GQV, GQS

Submersible sewage and drainage pumps.
  • Single-impeller submersible pumps, with free-flow (vortex) impeller.
  • GQS: with vertical threaded delivery port G 1 1/2″ or G 2″.
  • GQV: with horizontal G 2” or G 2”1/2 threaded delivery port and with DN 50 or DN 65 flanged delivery port.
  • Double mechanical shaft seal with interposed oil chamber, to protect against dry-running.
Quick view

GQN

Submersible sewage and drainage pumps.
  • Single-impeller submersible pumps, (with two-passage) with channels impeller with vertical threaded delivery port (G 2”).
  • Double mechanical shaft seal with interposed oil chamber, to protect against dry-running.
Quick view

GEO

Automatic waste water collecting and lifting station.
  • High-density polyethylene tank, resistant to corrosion, with minimum overall dimensions.
  • – GEO 40 single tank with 40 liter nominal capacity for the installation of a GXRM type.
  • – GEO 230 single tank with 230 liter nominal capacity for the installation of an electropump type GM 10, GQ, GX or GM series.
  • – GEO 500 double tank with 500 liter nominal capacity for the installation of two electropumps type GM 10, GQ, GX or GM series.
  • Pipe kit for electropump connection.
  • Two possible installation, at ground level or underground.
  • For underground installation, extentions can be used.
  • Easy pump access through a cover fixed with screws.
Quick view

GEOTRIT-GEOCLEAN-GEOCOMP

Macerating pumping system. GEOCLEAN
  • GEOCLEAN makes the addition of a domestic kitchen or utility room easy even when below or distant from a drain.
  • The system has a clapet valve and it cannot be used with waste waters.
  • GEOCLEAN is provided with flexible sleeves, elbow, metal hose clips, plugs.
GEOCOMP
  • Macerating pumping system. It is possible to install a complete bathroom in a basement conversion or loft extension.
  • The GEOCOMP macerating system is installed in a case specifically designed for horizontal outlet spigots.
  • Installed and used correctly, this unit will give consistent and reliable service. The system has a grinder pump, clapet valve and carbon filter.
  • GEOCOMP is provided with flexible sleeves, elbow, metal hose clips.
GEOCLEAN
    • Lifting station for clean water.
    • GEOCLEAN makes the addition of a domestic kitchen or utility room easy even when below or distant from a drain.
    • The system has a clapet valve and it cannot be used with waste waters.
    • GEOCLEAN is provided with flexible sleeves, elbow, metal hose clips, plugs.
Quick view

I-MPC

Self-priming swimming pool pumps with built-in strainer and motor insulated from pumped water. The pump is made with high quality plastic materials, corrosion and sand erosion resistant. With stainless steel diffuser. Base-plate kit.
Quick view

NM, NMS

NM, NM4 Close-coupled centrifugal pumps; electric motor with extended shaft directly connected to the pump up to 22 kW (15 kW for NM4). NMS, NMS4 Close-coupled centrifugal pumps, new bracket construction for standard motors (stub-shaft construction) with integrated thrust bearing. Rated speed of rotation (50 Hz): NM, NMS ≈ 2900 rpm. NM4, NMS4 ≈ 1450 rpm. Pump casing with axial suction and radial delivery on top, main dimensions and performance according to EN 733 with additional sizes for completion. (NMS4 80/400). N 40-250C version with pump casing and lantern bracket in cast iron. BNM(S), BNM(S)4: version with pump casing and lantern bracket/casing cover in bronze. The pumps are supplied fully painted. Version with frequency converter (on request)
Quick view