GM5-9
Submersible drainage pump
- Submersible drainage pump constructed with composite polymers developed especially for this product.
- Double shaft seal with oil chamber.
- Small dimensions and great performance, for use in a wide variety of applications, for flow rates up to 217 litres per minute.
- With float switch for automatic start and stop.
Description
Technical Specifications
Flow
1,2 / 13
mc / h
Head
2 / 8,9
m
Power
0,33
kW
Applications
- For clean water with suspended solids up to a diameter of 5 mm.
- For draining flooded rooms or tanks.
- Extraction of water from ponds, flowing water or pits for collection of rain water.
- For irrigation purposes.
Operating conditions
- Maximum liquid temperature for prolonged use: 35 °C (with immersed motor).
- Immersion depth: 5 m max
Additional information
| Brands | Calpeda |
|---|---|
| Category Top Level | Building Services |
Related products
GM 10-8
Submersible drainage pump
- Submersible drainage pump constructed with composite polymers developed especially for this product.
- Double shaft seal with oil chamber.
- Small dimensions and great performance, for use in a wide variety of applications, for flow rates up to 233 litres per minute.
- With float switch for automatic start and stop.
GX ZERO
Submersible clean water pumps
- Single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port and suction non-return valve.
- Suction capability up to 1 mm from the bottom.
Motor cooled by the pumped water passing between the motor jacket and the external jacket. - Double shaft seal with oil chamber.
- The pump is fitted with a suction non-return valve which, during operation, allows to manually move the pump to several points in the room and draw water up to 1 mm avoiding that the pump loses its priming.
GQR
Submersible drainage pumps.
- Single-impeller submersible drainage pump, with open impeller.
- GQR: with vertical threaded delivery port (G 1 1/2).
- GQR 10 32: with horizontal flanged and threaded delivery port (DN 32, PN 6 – G 1 1/2).
- Double mechanical shaft seal with interposed oil chamber, to protect against dry-running.
GEO
Automatic waste water collecting and lifting station.
- High-density polyethylene tank, resistant to corrosion, with minimum overall dimensions.
- – GEO 40 single tank with 40 liter nominal capacity for the installation of a GXRM type.
- – GEO 230 single tank with 230 liter nominal capacity for the installation of an electropump type GM 10, GQ, GX or GM series.
- – GEO 500 double tank with 500 liter nominal capacity for the installation of two electropumps type GM 10, GQ, GX or GM series.
- Pipe kit for electropump connection.
- Two possible installation, at ground level or underground.
- For underground installation, extentions can be used.
- Easy pump access through a cover fixed with screws.
NM, NMD
Close-coupled, centrifugal pumps with screwed connections; electric motor with extended shaft directly connected to the pump.
NM: single-impeller
NMD: with two back-to-back impellers (with axial thrust balancing).
Connections: threaded ports ISO 228/1 (BS 2779).
NM, NMD: version with pump casing and lantern bracket in cast iron.
BNM, BNMD: version with pump casing and lantern bracket in bronze.
The pumps are supplied fully painted.
Reviews
There are no reviews yet.